Keysight N5224B, Руководство по обслуживанию

Страница: 604 / 614

8-98 Keysight N5224B/25B Service Guide
General Purpose Maintenance Procedures
Keysight License Manager
8-
Enabling or Removing Options
There are two types of options:
— Hardware: Hardware options involve adding additional hardware to the
analyzer. After the proper hardware has been installed in the analyzer, the
appropriate license can be installed using the Keysight License Manager.
It is necessary to re-enable all installed hardware options, if the midplane
board is replaced.
— Software: Software options add features or functionality to the analyzer
without the need for additional hardware. These options are enabled by
installing the appropriate licenses using the Keysight License Manager
(KLM). Refer to
https://www.keysight.com/us/en/assets/9018-04534/installation-guides
/9018-04534.pdf
(N5242-90024).
To enable or remove an option:
1. Start the Keysight License Manager. Refer to “Accessing the Keysight
License Manager” on page 8-97 .
2. In the Keysight License Manager window that opens, in the left hand
column, press Local host > Local licenses . A list of available options,
similar to the list below, will appear. Refer to Figure 8-5 on page 8-97 .
S93015A - Dynamic uncertainty for S-parameters
S93025A - Basic pulsed-RF measurements
S93086A - Gain Compression Application
S93087A- IMD Measurements
219 - Src/Rcvr Atten & Bias Ts 2-Port
419 - Src/Rcvr Atten & Bias Ts 4-Port
3. Press and hold (or right click with a mouse) the option that you wish to
either enable or remove, and then click Install or Delete , whichever is
appropriate.
Repairing and Recovering Option Data
For information on repairing or recovering option data, refer to Keysight
License Manager help on your instrument.
Some applications require a license key file that is provided by Keysight. If
you do not have the required license key file, contact Keysight for
assistance. Refer to “Contacting Keysight” on page 2-7
.