174
Keysight B2980B User’s Guide, Edition 1
Front Panel Reference
Config Key Group
This is the source setup condition after
output off. See
Resistive Limit State
Voltage source output resistor (20 M
)
connection, ON (serial connection) or OFF
(no connection)
Sweep Dialog Box
(B2985B/B2987B) This dialog box provides the following parameters for setting
details of the sweep source operation.
Sweep Ranging
Ranging mode used for the sweep source operation, BEST or
.
Sweep Direction
Sweep direction, UP (start to stop direction) or DOWN (stop to
start direction)
Output after
Sweep
The value the source channel applies after it completes the
sweep output
START VALUE (START): The source channel changes the output
to the DC output value just before applying the sweep output
start value.
END VALUE (END): The source channel keeps the output value
when the sweep output is stopped.
Table 4-7
Ranging Mode used for Sweep Source Operation
Input Connection Dialog Box
(B2985B/B2987B) This dialog box provides the following parameters for setting
the measurement operation and connection.
Description
BEST
The sweep source channel automatically uses the minimum range which covers the
whole sweep output.
FIXED
The sweep source channel sets the range specified by the range parameter
Spot
Source Range
. See
Содержание B2980B Series
