Keysight Technologies B1542A Pulsed IV Package, Руководство пользователя

Страница: 11 / 160

Keysight B1542A User’s Guide, Edition 10 1-3
Introduction
Overview
Overview
Keysight B1542A Pulsed IV Package expands the capabilities of Keysight B1500A
Semiconductor Device Analyzer to enable the ultra short pulsed IV measurements
with parametric characterization down to 10 ns pulse width for many new device
structures such as silicon-on-insulator (SOI) transistors that are more susceptible to
harmful thermal effects during characterization.
Using the B1542A, you can easily and effectively configure the pulsed IV test
system and perform the pulsed IV measurement of MOSFET on the Keysight
EasyEXPERT or Desktop EasyEXPERT application test environment.
The B1542A supports the B1500A as the DC source monitor. And the B1542A
additionally supports the Keysight 4155B/4155C/4156B/4156C Semiconductor
Parameter Analyzer and the Keysight E5260/E5270 Series of Parametric
Measurement Solutions by using the Desktop EasyEXPERT software.
System Hardware
The pulsed IV test system can be configured by using the following equipment. See
Figure 1-1 . The B1542A provides the accessories used to connect the equipment.
• Keysight B1500A Semiconductor Device Analyzer
• Oscilloscope, minimum two measurement channels, see Table 1-1
• Pulse Generator, minimum one output channel, see Table 1-2
• Switch Controller and Pulse/dc Switch Units, furnished with the B1542A
• Windows PC installed with Desktop EasyEXPERT
Optional for the system with the B1500A. Absolute necessity for the system
with the following instrument.
• Keysight 4155B/C Semiconductor Parameter Analyzer
• Keysight 4156B/C Precision Semiconductor Parameter Analyzer
• Keysight E5260A/E5270B Measurement Mainframe
The pulsed IV system uses 3 channels of SMU. So Keysight E5262A/E5263A
2-channel SMU is not recommended. However it may be used if you change the
connections manually. Because the pulsed IV measurement uses one SMU and the
DC IV measurement uses only 2 ea. of SMU.