Keysight Technologies B1542A Pulsed IV Package, Руководство пользователя

Страница: 73 / 160

Keysight B1542A User’s Guide, Edition 10 5-5
PLSDIV Test Definitions
PLSDIV Capt Wave
Test Parameters
The following parameters are available to set the source output.
PulseWidth Pulse width of PGU output pulse. 10 ns to 1

s, 4 digits or 1 ns
resolution. See “Parameters” on page 5-34 .
Vg Voltage applied to the gate terminal. PGU output.
-
4.5 V to
4.5 V, 4 digits or 10 mV resolution.
PulseBase PGU output baseline voltage.
-
3.0 to 3.0 V, 4 digits or 10 mV
resolution. See “Parameters” on page 5-34 . Pulse amplitude
must be > 55 mV and < 4.5 V. To use the gate voltage automatic
adjustment function, set the pulse amplitude to < 4.0 V.
Vd Voltage applied to the drain terminal. SMU output.
-
10 V to
10 V, 5 digits or 1 mV resolution.
Extended Test
Parameters
The following parameters are available to set the test condition. For more details,
see
“Parameters” on page 5-34 .
TransTime Pulse leading/trailing edge transition time, in s. 2 ns to 500 ns, 3
digits or 1 ns resolution.
For the 81101A, minimum value is 5 ns.
For the 81150A, minimum value is 2.5 ns when the following
conditions are satisfied, or 7.5 ns.
• Pulse amplitude is 2.5 V or less.
• Both pulse base and top are within

2.5 V.
MeasTime Measurement timing at the pulse top. 0 to 1, 3 digits or 0.01
resolution.
SmplNum Oscilloscope sampling number. 16 to 262144, 6 digits or 1 step.
SmthNum Oscilloscope smoothing number. 3 to 4001, 4 digits or 1 step.
SmthStat Status of the oscilloscope smoothing. Enable or Disable.
AvgNum Oscilloscope averaging number. 1 to 4095, 4 digits or 1 step.
VdAdjust Status of the drain voltage automatic adjustment. Enable or
Disable.
VgAdjust Status of the gate voltage automatic adjustment. Enable or
Disable.
ConnectChk Status of the connection check at initialization. Enable or
Disable.