Ketterer KuLi Series, Руководство по сборке

Страница: 29 / 44

Programming
3215.72-01i01 Rev. A
P a g e | 25
7 Programming
7.1 Parameterization with software versions DM / SM / PM / EX
The behaviour of the KuLi in the standard versions DM (Dynamic
Mode), SM (Standard Mode) and PM (Power Mode) can be
adjusted to the respective application using the
parameterization software and uploaded using the "Connect-
Box" parameterization adapter. Please observe the following
chapters for this purpose.
Individual parameterization in the EX software version (Expert
Mode) must be carried out by Ketterer. After parameterization,
start-up must also be carried out in cooperation with Ketterer.
Qualification of the personnel “Connect-Box”

The installation and electrical connection of the device may only
be carried out by a qualified electrician. The qualified personnel
must be instructed and authorized by the system operator.

Only persons who have been instructed and authorized by the
system operator may use the device.
 Malfunctions or damage to the device must be reported
immediately to the qualified personnel responsible for the
electrical connection.

The device must be taken out of operation by the responsible
technical personnel until the fault has been corrected and
secured against accidental use.