Ketterer KuLi Series, Руководство по сборке

Страница: 17 / 44

Product description
3215.72-01i01 Rev. A
P a g e | 13
Software-Version
Dynamic
Mode
Standard
Mode
Power
Mode
Max. Push / pull force [N]
(horizontal mounting position)
100 200 300
Average speed at 40mm* [mm/s]] 267 160 114
Average travel time [s] 150 250 350
Max. number of cycles*
[Cycles / min.]
46 29 12
Duty cycle ED
Time per cycle*
Holding time per cycle*
23%
0,3 s
1 s
24 %
0,5 s
1,4 s
13 %
0,7 s
4,5s
* One cycle = extend-pause-retract-pause
If finer force/travel time settings are required, this can be done
in 50N increments using the parameterization software via PC
(see Chapter 7.1).
The Expert Mode software variant (EX: KuLi-BX-VS-X-EX-X-X)
offers a maximum of adaptation options to your application.
Individual parameterization in the EX software variant (Expert
Mode) must be carried out by Ketterer. After parameterization,
start-up must also be carried out in coordination with Ketterer.
The parameterization in Expert mode offers the following value
ranges:
Expert Mode
KuLi-B6 (6mm)
Expert Mode
KuLi-B1 (1mm)
Max. Push / pull force [N] 0 - 300 0 - 500
Ø Speed at 40mm [mm/s] 455 - 114 75 - 15
Travel time 40 mm [s] 0,09 – 0,35 0,54 – 2,67
Max. number of cycles*
[Cycles / min.]
103 - 12 40 - 6
* One cycle = extend-pause-retract-pause