Ketterer KuLi Series, Руководство по сборке

Страница: 12 / 44

Safety Instructions
3215.72-01i01 Rev. A
P a g e | 8
2.4 Use
The KuLi is only intended for industrial systems, for installation
in machines within the meaning of MRL 2006/42/EC.
The KuLi has been designed and built for use in accordance with
its intended use. If you use the KuLi for a purpose other than the
one listed, the manufacturer cannot be made liable for any
damage resulting from this.
2.4.1 Intended use
The intended use of the KuLi is to perform a centric pressure- or
tension-loaded stroke. The loads can be moved, held or
positioned.
The KuLi may only be operated with an anti-rotation lock on the
plunger and in combination with a suitable higher-level control
system.
The KuLi may only be used in indoor applications in industry.
The KuLi may only be operated within the operating conditions
specified in this document (chapter 3.3 "Technical data /
Operating conditions").
The KuLi may only be operated in one of the three operating
modes. If operation outside of these modes is intended, this is
only possible in consultation with the manufacturer.
2.4.2 Foreseeable misuse
Misuses are:
 Any use other than the intended use without the written
consent of the manufacturer.
 Operation in the range outside the operating conditions
specified in this document (chapter 3.3 "Technical data /
operating conditions"), if these have not been agreed with the
manufacturer.
 Interventions in the components or in the system during
operation.
 Non-functional assembly in which the plunger rod / guide is
firmly fixed and thus the housing of the KuLi carries out the
stroke movement
 If the KuLi is in extended state connected to the PC/laptop and
the Connect-Box and this link is disconnected when the supply
voltage is switched on, the KuLi moves to the inner reference
point.