Ketterer KuLi Series, Руководство по сборке

Страница: 13 / 44

Safety Instructions
3215.72-01i01 Rev. A
P a g e | 9
2.5 Residual risks
Despite all actions taken to integrate safety in the design, safety
provisions and additional protective actions, non-obvious
residual risks cannot be completely avoided. You can reduce
residual risks by carefully following the safety instructions and
the intended use.
Life phase / Activity Residual risk
Packing / Transport / Unpacking /
Assembly / Maintenance / Disassembly /
Service / Repair
Cutting injuries
Despite strict quality controls, parts of the Kuli, as well as the
accessories and packaging, may have sharp edges and
corners which can lead to cuts. Make sure that you wear
suitable protective gear whenever handling the Kuli.
Start-Up / Operation / Maintenance /
Disassembly / Service / Repair
Hot surfaces
Depending on the load and environmental temperature, the
surfaces of the Kuli may reach temperatures of over 90 °C.
Only perform necessary activities directly with the Kuli after
it has cooled down completely.
Assembly / Start-Up / Operation /
Maintenance / Disassembly / Service /
Repair
Electrical voltage / residual energy
Residual electrical energy may remain in lines, electrical
components, equipment and devices when the Kuli is
switched off. Only allow work on the electrical supply to be
carried out by qualified electrical personnel. Make sure that
all phases and the complete electrical system are voltage-
free. There must be no residual voltage left in the system, so
wait at least 5 minutes after complete disconnection from
the power supply before carrying out the necessary work.
Start-Up / Operation Uncontrolled movements
Incorrect assembly or control of the KuLi can lead to
uncontrolled movements. There is a risk of injury in this case.
Only use the KuLi after it has been correctly installed in
accordance with the installation instructions and only in
combination with a suitable master control system.
Maintenance / Disassembly / Service /
Repair
Automatic start-up
If the KuLi is not secured against unauthorized restart when
it is shut down, there is a risk of unexpected start-up, which
can lead to serious injuries. Secure the mains disconnection
device by suitable means (key, lock).
Start-Up / Operation / Maintenance
Trapping, pulling in, gripping, crushing
The stroke movement of the KuLi can cause objects, items of
clothing or body parts to be trapped, pulled in, gripped or
crushed. Therefore, never carry out activities on the KuLi
when it is in operation.
Start-Up / Operation Breakage
Overloading the KuLi above the specified load limits can lead
to breakage and thus to injury or damage to property.