Kenwood TK-2170 SERIES, Справочник по функциям

Страница: 41 / 142

FUNC (K)/Ver. 1.01 Confidential
Contents Index
29
8 KEY ASSIGNMENT
Various functions can be assigned to the Selector and
PF keys.
„
Configuration using KPG-101D
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)
8.1 Assigning Functions to the
Selector
A function can be assigned to the Selector by using
KPG-101D.
Table 8-1 Assigning Functions to the Selector
8.2 Assigning Functions to
PF keys
A function can be assigned to the PF key by using KPG-
101D.
Table 8-2 Assigning Functions to PF Keys
Function Name Description
None
Transceiver does not respond. When
the
Selector is rotated, the Key-entry
Error Tone sounds.
CH/GID Up/Down
When the Selector is rotated, the
CH/GID number is incremented or
decremented in steps of 1.
Zone Up/Down
When the Selector is rotated, the Zone
number is incremented or decremented
in steps of 1.
Function Name Description
None
Transceiver does not respond. The
transceiver emits the Key-entry Error
Tone when the
None key is pressed.
2-tone
The 2-tone code stored in the 2-tone
Encode List can be selected when the
2-tone key is pressed. The transceiver
sends the 2-tone code when the PTT
switch or Side 2 key is pressed.
(Refer to 19 2-tone on page 76.)
Auto Telephone
(TK-3173 only)
The transceiver automatically connects
to the LTR System in order to
communicate by using a telephone
when the
Auto Telephone key is
pressed. (Refer to 15.1.14 Auto
Telephone Search on page 46.)
Autodial
When the Autodial key is pressed, a
user can select the DTMF code
configured in the DTMF Autodial List.
The transceiver sends the DTMF code
when the
PTT switch or Side 2 key is
pressed. (Refer to 18 DTMF on page
63.)
Autodial
Programming
When the Autodial Programming key
is pressed, the DTMF Autodial List can
be configured, changed or cleared.
(Refer to 18.4.2 Autodial Programming
on page 73.)
AUX
When the AUX key is pressed, the AUX
1 Output terminal status can be
changed. The AUX 1 Output terminal
status is switched to Inactive when the
status is Active. On the other hand, the
AUX 1 Output terminal status is
switched to Active when the status is
Inactive. An external device connected
to the AUX 1 port can be controlled
since the port output changes in
conjunction with the
AUX key.
Call 1 or Call 2
When one of the Call 1 to Call 2 keys is
pressed, the transceiver sends the
assigned FleetSync Status, DTMF code
or 2-tone code.
(Refer to 1.11 Call Key
on page 6.)
CH/GID Down
When the CH/GID Down key is pressed,
the CH/GID number decrements in
steps of 1.
The CH/GID is decremented in steps of
1 every 200 ms if the
CH/GID Down key
is pressed or held for more than 1
second.
(Refer to 2.5 Changing the CH/
GID on page 9.)
CH/GID Up
When the CH/GID Up key is pressed,
the CH/GID number increments in steps
of 1.
The CH/GID is incremented in steps of 1
every 200 ms if the
CH/GID Up key is
pressed or held for more than 1 second.
(Refer to 2.5 Changing the CH/GID on
page 9.)
Channel Entry
When the Channel Entry key is
pressed, the channel number can be
directly selected using the keypad.
(Refer to 2.6 Channel Entry on page 10.)
Direct CH/GID 1 to
Direct CH/GID 4
When one of the Direct CH/GID 1 to
Direct CH/GID 4 keys is pressed, the
transceiver jumps to the configured CH/
GID.
(Refer to 2.8 Direct CH/GID on
page 11.)
Display Character
When the Display Character key is
pressed, the CH/GID Name or Zone-CH/
GID Number appears on the display.
(Refer to 3.4.5 Display Character on
page 16.)
Emergency
When the Emergency key is pressed,
the transceiver enters Emergency
Mode.
(Refer to 22 Emergency Mode on
page 114.)
Function Name Description