Kenwood TK-2170 SERIES, Справочник по функциям

Страница: 76 / 142

18 DTMF
64
Index Contents
Confidential FUNC (K)/Ver. 1.01
4. Press the PTT switch to send the DTMF code
and voice.
Press the
Side 2 key to send the DTMF code
only.
The transceiver sends the DTMF code.
z Using the Selector
*1
*1
If the List Selection Key (Selector) is enabled.
1. Press the Autodial key.
The Store & Send Entry display appears on the
display.
2. Select characters to enter a DTMF code.
Turn the Selector
*1
clockwise or
counterclockwise.
A current entry blinks and entered characters
are shifted to left.
*1
If the List Selection Key (Selector) is enabled.
3. Press the [C>] key after the code is confirmed.
The entered digit stops blinking and is
confirmed on the display.
4. Repeat steps 2 and 3 if necessary.
5. Press the PTT switch to send the DTMF code
and voice.
Press the
Side 2 key to send the DTMF code
only.
The transceiver sends the DTMF code.
„ Configuration using KPG-101D
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
• Assigning functions to the Keypad Operation
(Refer to FPRG 6.8.2 General Tab - Keypad
Operation.)
• Configuring the Store & Send (Refer to FPRG
6.10.1 Encode Tab - Store & Send.)
• Configuring the List Selection Key (Selector)
(Refer to FPRG 6.8.2 General Tab - List Selection
Key (Selector).)
Note:
 Press and hold the [*] key for 1 second, then press the [2] key to
enter the DTMF “A” code.
 Press and hold the [*] key for 1 second, then press the [5] key to
enter the DTMF “B” code.
 Press and hold the [*] key for 1 second, then press the [8] key to
enter the DTMF “C” code.
 Press and hold the [*] key for 1 second, then press the [0] key to
enter the DTMF “D” code.
 Press and hold the [*] key for 1 second, then press the [*] key
again to enter the DTMF “*” code.
 Press and hold the [*] key for 1 second, then press the [#] key to
enter the DTMF “#” code.