Kenwood TK-2170 SERIES Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 142

Kenwood TK-2170 SERIES Скачать руководство пользователя страница 70

16 SIGNALING

58

Confidential

FUNC (K)/Ver. 1.01

If the QT/DQT Decode is configured for the
current channel, a user can hear the received
audio when the transceiver receives a signal
and the QT/DQT signaling is inactive.

2.

Release the

Monitor Momentary

key.

The “

” icon disappears.

If the QT/DQT is configured for the current
channel, the transceiver returns to Signaling
Squelch.

Note:

Optional Signaling is reset and activates if the

Monitor

or

Monitor Momentary

key is pressed while the Optional

Signaling is disabled.

In Trunking System, the transceiver does not unmute unless
the ID matches even if the transceiver receives a signal. If
the Optional Signaling is configured for the Group ID, the
transceiver unmutes only with the Optional Signaling.

The status of the

Monitor

key is retained even if the

transceiver is turned OFF.

Configuration using KPG-101D

• Assigning functions to the

PF

keys (Refer to

FPRG 6.8 Key Assignment.)

16.5.1 Transceiver Operation during

the Scan in Conventional

Group

In Conventional Group, the transceiver resets the
signaling and unmutes only with a carrier.
The “

” icon appears if the

Monitor

key is pressed

during the scan. In this case, the transceiver continues
scanning. The transceiver starts Carrier Squelch while
the “

” icon appears.

The transceiver returns to Carrier Squelch if the

Monitor

Momentary

key is pressed during the scan. The

transceiver does not stop scanning even if the

Monitor

Momentary

key is pressed.

16.5.2 Transceiver Operation during

the Scan in Trunking System

In Trunking System, the transceiver resets the Optional
Signaling and mutes only with the LTR ID. The “

” icon

appears if the

Monitor

or

Monitor Momentary

key is

pressed during the scan. In this case, the transceiver
continues scanning.

16.6 Squelch Off

Squelch Off can be used to open Squelch and unmute.
With Squelch Off, the transceiver can unmute without
receiving a carrier. Monitor is used to check channel
status before transmitting in order to communicate
without interfering with other parties.
Press the

Squelch Off

or

Squelch Off Momentary

key

to use this function.

Transceiver Operation

z

Squelch Off

• Press the

Squelch Off

key if Squelch Off is

disabled.

The “

” icon appears. The Busy LED lights

green if the Busy LED is configured.
The transceiver unmutes and opens Squelch
regardless of the QT/DQT Decode configuration.
White noise is heard if the transceiver is not
receiving any signals.
Squelch status of the transceiver is the same
status as Squelch Level 0.

«
...
68
69
70
71
72
...
»

Содержание TK-2170 SERIES















































































































































Отзывы:

Нет отзывов