Kelvinator KSV25CRG, Руководство по установке, Страница: 10 / 24

Outdoor unit installation
WARNING caution
• Install the outdoor unit on a rigid base to prevent excessive
noise level and vibration.
• Choose an outdoor unit location where the air outlet direction
is not blocked, and the clearances as per the assembly
diagram (figure 1) are followed.
• In the case that the installation location is exposed to strong
wind such as a seaside, make sure the fan can operate properly
by putting the unit lengthwise along the wall or using a dust
or shield plates. If installing on a wall bracket, the installer
must supply a suitable mounting bracket that can hold the full
weight of the product, use suitable fixings to attach to the wall
and must follow the installation instructions of the wall bracket
accordingly.
• The installation wall should be solid brick, concrete or the
same intensity construction, or take actions to reinforce,
support and add vibration dampening material as required.
The connection between the wall, bracket and the air
conditioner should be firm, stable and reliable.
• Be sure there is no obstacle which blocks the air flow.
Incorrect
Fig. 9
Correct
Barrier
Strong
wind
Strong
wind
✗
✓
Location of outdoor unit
• Anchor the outdoor unit with a 8 or 10 diameter bolt and nut
tightly and horizontally on a concrete or rigid mount.
Model
Outdoor unit
dimensions
W x H x D (mm)
Outdoor
unit
weight
(kg)
Dimensions
A (mm) Dimensions
B (mm)
KSV25CRG
KSV25HRG
KSD25HRG
KSV35CRG
KSV35HRG
KSD35HRG
885 x 554 x 365 35 514 340
KSV50HRG
KSD50HRG
924 x 702 x 382 44 540 350
KSV70CRG
KSV70HRG
KSD70HRG
924 x 702 x 382 55 540 350
KSV80HRG
KSD80HRG
1024 x 810 x 455 67 673 403
Drain elbow installation
NOTE: The drain elbow is slightly different according to the
different outdoor unit. For the drain elbow with the seal (Fig.11
(A)), first fit the seal onto the drain elbow, then insert the drain
elbow into the base pan hole of outdoor unit, rotate 90 to securely
assemble them. To install drain elbow as shown in Fig.11 (B), insert
the drain elbow into the base pan hole of outdoor unit until it
remains fixed with a clicking sound.
The installer may supply and connect a drain hose to the drain
elbow to direct the condensed water to a suitable location that will
not cause damage to people or property."
In cold areas that can drop below 0°C, it is not recommended to
install a drain hose as it may be subject to freezing
H
W
A
D B
Air inlet
Air inlet
Fig. 10
Air outlet
Fig. 11
Seal
Seal Drain elbow Base pan hole
of outdoor unit
Drain pipe
(A)
(B)
10 Outdoor unit installation Kelvinator Air Conditioning