
1-12
Return to
6482-901-01 Rev. A / August 2012
Section 1: Getting Started
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
Default settings
This section covers factory default setups and saving and recalling user setups. By using
appropriate menu selections, as described below you can save and restore various instrument
setups, define the power-on configuration, or restore factory defaults.
Saving and restoring user setups
You can save and restore up to five of your own user setups using the following procedures.
Saving setups
1. Select the various instrument operating modes you wish to save.
2. Press the
MENU
key, select
SAVESETUP
, and then press the
ENTER
key.
3. From the SAVESETUP MENU, select
SAVE
, and then press the
ENTER
key.
4. Using the EDIT or RANGE
or
keys, select the setup position (0 to 4) to save, and then
press the
ENTER
key to complete the process.
Restoring setups
1. Press the
MENU
key, select
SAVESETUP
, and then press the
ENTER
key.
2. From the SAVESETUP MENU, select
RESTORE
, and then press the
ENTER
key.
3. Using the EDIT or RANGE
or
keys, select the setup position (0-4) to restore, and then
press the
ENTER
key to complete the process.
Power-on configuration
You can also define which of the stored setups (factory default or user) the instrument uses as the
power-on configuration, as follows:
1. Press the
MENU
key, select
SAVESETUP
, and then press the
ENTER
key.
2. From the SAVESETUP MENU, select
POWERON
, and then press the
ENTER
key.
3. From the SET POWER-ON DEFAULT menu, choose the power-on configuration:
BENCH
or
GPIB
for specifics), or
USER-SETUP-NUMBER
.
4. If you chose to use a user setup as the power-on configuration, select the user setup number,
and then press the
ENTER
key.
Factory default settings
As summarized in
, there are two sets of factory defaults: BENCH (front panel) and GPIB
(remote). You can restore either of these default conditions as follows:
1. Press the
MENU
key, select
SAVESETUP
, and then press the
ENTER
key.
2. From the SAVE SETUP MENU, select
RESET
, and then press the
ENTER
key.
Содержание 6482
Страница 3: ......
Страница 62: ...Section 4 Range Digits Speed and Filters In this section Topic Page Range and digits 4 2 Speed 4 4 Filters 4 6...
Страница 90: ...Section 7 Sweep Operation In this section Topic Page Sweep types 7 2 Configuring and running a sweep 7 5...
Страница 182: ...Section 14 Common Commands In this section Topic Page Command summary 14 2 Command reference 14 2...