Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 2: General operation
2657A-901-01 Rev. B/December 2012
2-39
Saving user setups
You can save the present Model 2657A setup to internal nonvolatile memory or a USB flash drive.
To save a user setup to nonvolatile memory from the front panel:
1. Configure the Model 2657A to the settings that you want to save.
2. Press
the
MENU
key.
3. Select
SETUP
and then press the
ENTER
key.
4. Select
the
SAVE
menu item and then press the
ENTER
key.
5. Select
INTERNAL
and then press the
ENTER
key.
6. Select the user number (1 through 5), and press the
ENTER
key.
To save a user setup to an external USB flash drive from the front panel:
1. Configure the Model 2657A to the settings that you want to save.
2. Insert the USB flash drive into the USB port on the front panel of the Model 2657A.
3. Press
the
MENU
key.
4. Select
SETUP
and then press the
ENTER
key.
5. Select
SAVE
and then press the
ENTER
key.
6. Select
USB1
. The file name
setup000.set
is displayed.
7. Turn the navigation wheel
to change the last three digits of the file name and then press the
ENTER
key.
Recalling a saved setup
You can recall setups from internal nonvolatile memory or a USB flash drive at any time.
To recall a saved setup from the front panel:
1. Press
the
MENU
key to access the main menu.
2. Select
SETUP
, and then press the
ENTER
key.
3. Select
the
RECALL
menu item, and then press the
ENTER
key.
4. Select one of the following:
•
INTERNAL
•
USB1
5. INTERNAL only: Do one of the following:
•
Select the user number (1 through 5), then press the
ENTER
key.
•
Select
FACTORY
to restore factory defaults, then press the
ENTER
key.
6. USB1 only: Select the appropriate file and then press the
ENTER
key.
Содержание 2657A
Страница 3: ......