Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 8: Troubleshooting guide
2657A-901-01 Rev. B/December 2012
8-7
Error summary
Error number
Error level
Error Message
5044
RECOVERABLE
Cannot perform requested operation while current measure
autorange is enabled
5045
RECOVERABLE
Cannot perform requested operation while filter is enabled
5046
SERIOUS
SMU too hot
5047
RECOVERABLE
Minimum timestamp resolution is 1us
5048
RECOVERABLE
Contact check not valid with HIGH-Z OUTPUT off
5049
RECOVERABLE
Contact check not valid while an active current source
5050
RECOVERABLE
I limit too low for contact check
5051
FATAL
Model number/SMU hardware mismatch. Disconnect DUT and cycle
power
5052
RECOVERABLE
Interlock engaged; system stabilizing
5053
RECOVERABLE
Unstable output detected - Measurements may not be valid
5055
RECOVERABLE
Cannot change adjustment date - change cal constants before
operation
5059
RECOVERABLE
trigger.source.action enabled without configuration
5060 RECOVERABLE
trigger.measure.action enabled without configuration
5061
RECOVERABLE
Operation not permitted while OUTPUT is off
5063
RECOVERABLE
Cannot perform requested operation while measure autozero is on
5064
RECOVERABLE
Cannot use reading buffer that collects source values
5065
RECOVERABLE
I range too low for contact check
5066
RECOVERABLE
source.offlimiti too low for contact check
5067
FATAL
Hardware communication error. Disconnect DUT and cycle power
5068 SERIOUS ADC
trigger
failure
Содержание 2657A
Страница 3: ......