13
Getting Ready
Charging using the AC adapter (sold separately)
The following describes how to charge the battery pack
using the common AC adapter 03 (sold separately). (Note
that your AC adapter may be different from this illustration.)
LED indicator
Common Ac adapter
03 (sold separately)
To 100 VAC
power outlet
microUSB plug
External connection
jack side
microUSB plug side
-2
-1
Open the external connection jack cap of
the IS11T ( -1) and insert microUSB plug
( -2) of the Common AC adapter 03 (sold
separately)
• Check the shape of the tip of the connector and insert it
horizontally into the connector terminal.
Insert the common AC adapter 03 (sold
separately) power plug into the power outlet
• The LED indicator lights in red while charging (Depending
on the setting for the notification setting of some
applications, LED may not light in red even while charging.).
It turns off when charging is complete.
When charging ends, grasp the microUSB
plug and pull it straight out, and close the
external connector terminal cap
Disconnect the Common AC adapter 03 (sold
separately) power plug from the power outlet
◎ Be careful not to pull the external connection jack cap with
excessive force. Especially if you pull the external connection
jack cap with the connected cable to remove, it may be subject
to stronger force.
◎ Tugging the external connection jack cap may deform the cap,
come away from the body or case damage.