ZHEJIANG KAYO MOTOR CO., LTD.
5. Check brake pad wear condition at the foot brake clamp system.
6. Check braking system operate condition.
7. Check the chain.
8. Inspect rear sprocket, engine sprocket and chain guide structure.
9. Check the chain adjuster.
10. Check the outer surface of the tire.
11. Check tire pressure.
12. Check battery level.
13. Check the thickness of the front disc brake.
14. Check the thickness of the rear disc brake.
15. Check the torque of each fastener.
16. Check the engine gear.
17. Check cover parts.
18. Check the fuel tank switch.
19. Check protective apparels are all-ready worn.
PRECAUTIONS FOR STARTING
The steps of electric ignition are as follows:
1. Turn the oil tank switch to the "ON" position;
2. Open the electric lock;
3. Pinch the brake lever with the right hand;
4. Long Push the ignition switch with the fingers of the left hand;
5. Release the ignition switch after the engine works properly
That’s all for starting.
The steps of kick ignition are as follows:
1. Turn the oil tank switch to the "ON" position;
2.
Pinch the brake lever with the right hand;
3.Tramp the foot starting rod vigorously with the right foot;
4.
The engine works properly.
That is all for starting.
PRECAUTIONS FOR STOPPING
1.
Check the condition of the vehicle and the rider’s Equipment before starting off.
2. Speed up slowly when just starting off.
3. Start in gear “1” for ensure safety.
PRECAUTIONS FOR TURNING
1.Take care to slow down in advance when turning.
2.Lower your center of gravity to reduce the risk of side rolling when turning.
3.
Do not shift gears when turning.
PRECAUTIONS FOR ACCELERATION
www.kayomoto.com