ZHEJIANG KAYO MOTOR CO., LTD.
factory value, you should decrease the spring preload
appropriately; Conversely, increase the spring preload.
If "D2" is far less than the factory value, replace the
spring with a softer one; Conversely, replace the spring
preload with a harder one.
ADJUSTING THE SPRING PRELOAD OF REAR SHOCK ABSORBER
adjuster
You can adjust the spring preload by adjuster.
Turn clockwise to increase spring preload,
Turn counterclockwise to decrease spring preload.
CHECK FOR THE SETTING OF FRONT SHOCK ABSORBER
The inspection procedure is as follows:
1. Place the whole motorcycle on the ground
2. Up right the vehicle
3. Hold the handlebars with both hands and press down on the front shock absorber
4. Observe the effect of pressure and rebound of front shock absorber
ADJUSTING THE HANDLEBAR
The handlebars of the vehicle can be adjusted according
to the customer’s driving habits. The specific steps are
as follows:
1. Remove the sheath and sheath on the handlebar.
2. Unscrew the pressure block bolt so that the
handlebar can be turned.
3. Sit on the whole vehicle and hold the handlebar to
the position where both hands are placed naturally.
4. Screw back the pressure block bolt.
5.
Observe the position of the handlebar, if not
satisfied, repeat the above process.
VEHICLE MAINTENANCE
PLACEMENT
www.kayomoto.com