91 of 164
91 of 164
11.5.4 Software Update by USB
Important
Risk of damage to property due to damaged operating software.
●
Do not switch the receiver off during the update; rather, wait until the automatic
reboot has been completed in full.
●
Follow all instructions contained in the receiver messages.
▷
MENU
▶
MENU
▶
Service Menu
▶
Software Update by USB
The
Software Update by USB
menu item is only available if a USB stick is connected to the
receiver. The following functions are available:
●
Load operating software
●
Update Channel List
●
Save Channel List to USB
Load operating software
✔
An FAT32-formatted USB stick is available. The USB stick contains the folder
kathrein
and
sub-folder
ufs916
.
✔
The current operating software (*.zip) has been downloaded from
www.kathrein.com
▶
Ser-
vice
, unzipped and the contents (*.bin) have been saved to sub-folder
ufs916
on the USB
stick.
1. Note down the software information under
Main menu
▶
Service Menu
.
2. Insert the prepared USB stick into a free USB port on the receiver.
3. Select (
Main menu
▶
Service Menu
)
▶
Software Update by USB
▶
Update firmware
.
➯
The message
Are you sure?
appears.
4. Press
OK
to confirm the message.
➯
The receiver loads the operating software and restarts.
5. Select
Main menu
▶
Service Menu
and compare the software information displayed to that
noted down in step 1.
➯
If the software information displayed is for a later version than that noted down, the
update was successful.
➯
If the software information displayed is the same as that noted down, the downloaded
operating software was not a later version than the existing one.
6. Check the time setting under
Main menu
▶
Settings
▶
Basic settings
▶
Time setting
.
7. Remove the USB stick.
Содержание UFSconnect 916
Страница 1: ...IMPORTANT READ CAREFULLY BEFORE USE Instructions for use UFSconnect 916 English ...
Страница 71: ...71 of 164 71 of 164 ...
Страница 163: ...163 of 164 163 of 164 ...