117 of 164
117 of 164
12
Antenna & Satellite
Important
A certain degree of specialist knowledge is needed to make changes in the
Antenna
& Satellite
menu. Only change these settings if you are very familiar with the proper-
ties of your satellite reception system. Otherwise, consult your specialist dealer.
Tip
The following comments apply to this chapter:
●
If nothing is specified to the contrary, the operating instructions assume that
live TV/radio is shown
●
The following
applies
for the tables from
P. 122
:
– The hierarchy of the menu items is indicated as follows (example):
Satellite 1 ... 4
Top menu level
Satellite
Sub-menu level 1
LNB Type Sub-menu level 2
– In the right-hand columns, an
x
indicates to which types of satellite reception
system the menu items apply.
●
Please note the general information about operating instructions in 2.3, P. 9
Overview
The
Antenna & Satellite
menu offers a wide range of possible settings. Below is an overview of the
higher-level menu items and their functions:
Higher-level menu item
Function
Reception via
, P. 119
Select source via which the receiver obtains satellite sig-
nals:
Internal tuner
and/or
SAT>IP server.
Tuner Configuration
, P. 120 ff
Configure internal tuners
DiSEqC 1.0, DiSEqC 1.1 and Single
LNB
, P. 122 ff
Possible settings for satellite reception systems of type
DiSEqC 1.0, DiSEqC 1.1 and Single LNB.
Motorized Antenna (DiSEqC 1.2,
DiSEqC 1.3)
, P. 125 ff
Possible settings for satellite reception systems with a
motorized antenna of type DiSEqC 1.2 and DiSEqC 1.3.
SAT>IP
, P. 132
Possible settings for SAT>IP server
OneCable System
, P. 128
ff
Possible settings for one-cable systems
Содержание UFSconnect 916
Страница 1: ...IMPORTANT READ CAREFULLY BEFORE USE Instructions for use UFSconnect 916 English ...
Страница 71: ...71 of 164 71 of 164 ...
Страница 163: ...163 of 164 163 of 164 ...