Kathrein UFSconnect 916, Инструкция по эксплуатации

Страница: 121 / 164

121 of 164 121 of 164
The following types of one-cable system are available:
●
EXR .../EXU ...
●
UAS 481
●
SCD2
●
User-defined
Tuner 1
3)
As
Tuner 1& 2
Tuner 2
4)
As
Tuner 1& 2
1)
The rear panel of the receiver and its cabling are shown as a diagram in the menu.
2)
Only if
Tuner 2 Connection type
=
Loopthrough
3)
Only if
Tuner 2 Connection type
=
Separated
4)
Only if
Tuner 2 Connection type
=
Separated
and
Tuner 2 Signal Configuration
=
Different from Tuner 1
Tip
Summary
Tuner 2 connection type
Loopthrough
:
●
Tuner 2 adopts all settings from tuner 1.
●
Tuner 2 receives the same TV signal as tuner 1.
Tuner 2 connection type
Separated
/tuner 2 signal configuration
Same with Tuner 1
:
●
Tuner 2 adopts all settings from tuner 1.
●
Tuner 2 receives a TV signal that is independent of tuner 1
A)
.
Tuner 2 connection type
Separated
/tuner 2 signal configuration
Different from Tuner 1
:
●
Tuner 1 and tuner 2 are set independently of one another.
●
Tuner 2 receives a TV signal that is independent of tuner 1
A)
.
A)
Precondition: Tuner 2 (
LNB2 IN
) is connected directly to a satellite socket of the satellite
reception system.
Related topics
For a description of the one-cable system: See Quick Start Guide, 6.1 Preconditions, P.10
Configuration menu:
DiSEqC 1.0, DiSEqC 1.1 and Single LNB , P. 122
Configuration menu:
Motorized Antenna (DiSEqC 1.2, DiSEqC 1.3) , P. 125
Configuration menu:
OneCable System , P. 128