Kathrein UFSconnect 916, Инструкция по эксплуатации

Страница: 81 / 164

81 of 164 81 of 164
Satellite
Select a certain satellite
1)
or the setting
All Satellites
.
If
All Satellites
is selected, all the individual satellites that have been set up
2)
will be searched for
new channels. The reception system must be aligned with these satellites.
1)
The position of the satellite must be known if satellites with the same name are available for selection
in different positions. For example: ASTRA 1 at 19.2° east and ASTRA 3 at 23.5° east. For Germany,
Austria and Switzerland, ASTRA 1 at 19.2° east usually applies.
2)
Adding satellites: See Antenna & Satellite , P. 108 ff.
Channel Search Mode
Channel Search mode determines the type of channels to search for.
free & scrambled
All channels are searched for
free only
Only free-to-air channels are searched for
scrambled only
Only encrypted channels are searched for
Tip To show encrypted channels, you will need
●
A CI (Common Interface) module
●
A valid smart card from a pay TV provider
●
A valid subscription with a pay TV provider
NIT search (Network Search)
On
Additional transponders which have not yet been saved can be found by networking
transponders. Newly found transponders are saved and also searched for new chan-
nels.
Off
Only the transponders pre-set on delivery for the selected satellite are searched for
new channels.