Kathrein UFSconnect 916, Инструкция по эксплуатации

Страница: 14 / 164

14 of 164 14 of 164
Live TV – basic operation
4 Live TV – basic operation
4.1 Basic functions of the remote control
The basic functions of the remote control are described in the Quick Start Guide.
4.2 Operating functions on the unit
4.2.1 Switching between channels and live TV/radio
If the remote control is unavailable, the receiver can be operated with limited functionality using
the buttons on the front of the unit (Tab. 1). Functions that are password-protected cannot be
operated using these buttons (numeric buttons required!).
When the receiver is switched on, it is set to start with the same settings as when it was last
switched off.
Button Description
TV/Radio
Switches between live TV and radio.
+ Switches to the next channel up (in the currently selected channel list).
−
Switches to the next channel down (in the currently selected channel list).
Tab. 1: Functions of the control buttons on the front of the unit
4.2.2 Loading operating software on switch-on
An up-to-date version of the operating software can be loaded to the receiver during switch-on.
For this to happen, the following preconditions must be met:
✔
An FAT32-formatted USB stick is available. The USB stick contains the folder
kathrein
and
sub-folder
ufs916
✔
The up-to-date operating software has been downloaded from www.kathrein.com
▶
Sat
▶
Service and saved on the USB stick in sub-folder
ufs916
How to load the up-to-date operating software when switching on the receiver
1. Switch the receiver to standby, then turn it off with the on/off switch.
2. Insert the prepared USB stick into a free USB port on the receiver.
3. Press and hold down the
TV/Radio
button (on the front of the unit), then turn the receiver on
with the on/off switch.
4. Release the
TV/Radio
button.
➯
The receiver loads the operating software automatically, then restarts.
5. Remove the USB stick.