Kathrein UFSconnect 916, Инструкция по эксплуатации

Страница: 100 / 164

100 of 164 100 of 164
Main menu
Remote Control Code
You can assign one of the codes Code 1 to Code 4 to both the remote control and the receiver.
Tip Code assignment is possible with all Kathrein receivers delivered with an RC 660
or RC 67x remote control. See the instructions for the relevant receiver for more
information.
How to assign a different remote control code to the receiver
1. On the receiver, go to Live TV/radio
▶
MENU
▶
MENU
▶
Settings
▶
Basic Settings
▶
Remote Control
Code
.
➯
This page shows the shortcuts for the codes Code 1 to Code 4 .
2. On the RC67x remote control, press one of the following shortcuts at the same time :
Code 1 :
BACK
+
9
+
1
Code 2 :
BACK
+
9
+
2
Code 3 :
BACK
+
9
+
3
Code 4 :
BACK
+
9
+
4
➯
The following message appears:
The remote control code has been changed successfully
.
The
receiver is now restarted automatically.
Tip
●
This function changes the code of the receiver and of the remote control. This
enables the receiver to still be operated after the code has been changed.
●
Assign a different remote control code to each receiver. You can control several
Kathrein receivers with the same remote control by changing the remote control
code as described below under
How to assign a different remote control code to
the remote control .
How to assign a different remote control code to the remote control
►
On the RC67x remote control, press one of the following shortcuts at the same time :
Code 1 :
BACK
+
1
Code 2 :
BACK
+
2
Code 3 :
BACK
+
3
Code 4 :
BACK
+
4
➯
If you have selected the same code that is set on the receiver too, the receiver can now
be operated.
Tip This function only changes the code of the remote control.