Kathrein UFSconnect 916, Инструкция по эксплуатации

Страница: 43 / 164

43 of 164 43 of 164
How to move channels around within a list
1. Open list:
OK
▶

(red)
▶
select list.
2. Select and move channels: Highlight channel
▶
REC
▶

(repeat if required)
1)
▶
REC
▶
Move
▶
select new slot.
3. Complete edit operations: See How to complete edit operations , P. 43.
1)
After

has been pressed, the channels are identified with a check mark.
• Highlight channel again +

removes the check mark,
BACK
removes all check marks.
• For an alternative highlighting method, see
How to perform block selection .
How to perform block selection
Tip Block selection is suitable for editing consecutive channels (a channel block) simul-
taneously.
1. Open list:
OK
▶

(red)
▶
select list.
2. Highlight channels:
Highlight the first or last channel in the channel block
▶
REC
▶
REC
▶
Start
Blockselection
▶
highlight the other channels in the channel block (

)
1)
▶
REC
.
3. Edit the channel block:
Move
:
Move
▶
select new slot.
Other functions : Select function
▶
enter password, if required.
4. Complete edit operations: See How to complete edit operations below.
1)
The channels are identified with a check mark. Highlighting the channels again removes the check
marks,
BACK
removes all check marks.
How to complete edit operations
1. Press
BACK.
2. Highlight one of the following items:
Yes, save changes
or
No, do not save changes
3. Press
OK.