Kasei KZ-4000MT-PRO-2S страница 96 Скачать руководство пользователя

Страница: 96 / 118

SYMBOLE

Some of the following symbols may be used on this tool. Please study them and understand their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL NAME

DESIGNATION/EXPLANATION

Safety Alert

Indicates danger, warning or caution. It means attention!
Your safety is involved.

Read The Operator’
Manual

Read the operation manual and follow all warnings and
safety instructions.

Ricochet Alert

Danger of Ricochet.

Keep Bystanders
Away

Keep all bystanders (especially children and pets) at least
15m away from the work area.

Do not use toothed
blade

This unit is not intended for use with a toothed saw type
blade.

RPM Decal

Rotational direction and maximum speed of the shaft for the
cutting attachment.

Boots

Wear non-slip safety footwear when using this equipment.

Gloves

Wear non-slip, heavy-duty gloves.

No Smoking

Do not smoke when mixing fuel or filling fuel tank.

Petrol

Use unleaded petrol intended for motor vehicle use with an
octane rarting of 91([R+M]/2) or higher.

Oil

Use 2-stroke oil for air cooled engines.

Mix Petrol and Oil

Mix the fuel mix thoroughly and also each time before
refuelling.

Fully press and release the prime bulb 5 times.

All relevant directives, which require the CE-marking and
which are applicable for the product, are fulfilled.

Wear eye, hearing and head protection when operating this
equipment.

To reduce the risk of injury or damage, avoid contact with
any hot surface.

Содержание KZ-4000MT-PRO-2S























































































































Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды

Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды