Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Страница: 56 / 118

47
Transportation of the Machine
For periods of 3 months or longer
●
Drain and clean the fuel tank in a well ventilated area.
●
Dispose of fuel properly in accordance with
local environmental requirements.
●
Run the engine until the carburetor is dry – this helps prevent the
carburetor diaphragms sticking together.
●
Remove the saw chain and guide bar, clean them and spray
with corrosion inhibiting oil.
●
Thoroughly clean the machine –pay special attention to the cylinder fins
and air filter.
●
If you use a biological chain and bar lubricant,completely fill the chain oil tank.
●
Store
the machine in a dry, high or locked location, out of the reach of children and other unauthorized persons.
Checking and Replacing the Chain Sprocket
●
Remove the chain sprocket cover,chain and guide bar.
Replace the chain sprocket
– after using two saw chains or sooner
– if the wear marks (a) are deeper than 0.02 in (0.5 mm) since this would reduce
the life of the chain.Use a gauge (special accessory) to check the depth of the wear
marks.It is best to use two saw chains in rotation with one sprocket.