Kasei KZ-4000MT-PRO-2S Скачать руководство пользователя

Страница: 115 / 118



1st Free Service Coupon

ISO 9001-2008

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

Operations:

• Check and Test the Fuel Mixture.

• Check and Clean the Air Filter

• Check, Clean and Adjust the Spark plug

• Check and Adjust the Carburetor Tuning

• Check and Sharpen the cutting Tools

• Start and Check the Noise, Vibration, Loosen / Fasteners etc.

• Product familiarization on Usage

• Routine maintenance and Storage

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

ARRANTY AND FREE SERVICE COUPON

KZ-4000MT-PRO-2S MULTI TOOL - BRUSH CUTTER

2nd Free Service Coupon

ISO 9001-2008

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

Operations:

• Check and Test the Fuel Mixture.

• Check and Clean the Air Filter

• Check, Clean and Adjust the Spark plug

• Check and Adjust the Carburetor Tuning

• Check and Sharpen the cutting Tools

• Start and Check the Noise, Vibration, Loosen / Fasteners etc.

• Product familiarization on Usage

• Routine maintenance and Storage

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

ARRANTY AND FREE SERVICE COUPON

3rd Free Service Coupon

ISO 9001-2008

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Office Seal & Signature

Service No.

Purchase bill no.

Date

Serial Number

Operations:

• Check and Test the Fuel Mixture.

• Check and Clean the Air Filter

• Check, Clean and Adjust the Spark plug

• Check and Adjust the Carburetor Tuning

• Check and Sharpen the cutting Tools

• Start and Check the Noise, Vibration, Loosen / Fasteners etc.

• Product familiarization on Usage

• Routine maintenance and Storage

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

agriculture

horticulture

sericulture

plantations

forestry

garden

health care

ARRANTY AND FREE SERVICE COUPON

KZ-4000MT-PRO-2S MULTI TOOL - BRUSH CUTTER

Содержание KZ-4000MT-PRO-2S























































































































Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды

Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды