Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Страница: 58 / 118

49
filing to avoid one-sided wear.
●
Use a piece of hardwood to remove burrs from the cutting edge.
●
Check angles with the filing gauge.All cutters must be the same length.
If the cutters are not the same length,they will have different heights.
This makes the chain run roughly and can cause it to break.
●
Find the
shortest cutter and then file all other cutters back to the same length.
It is best to have this work done in the workshop on an electric grinder.
Depth gauge setting
The depth gauge determines the height at which the cutter enters
the wood and thus the thickness of the chip removed.(a-Specified
distance or setting between depth gauge and cutting edge.)This
setting may be increased by 0.2 mm (0.008 in.) for cutting
softwood in the mild weather season – no frost.
WARNING!
You must use the saw chain and guide bar,which we are recommended in the
technical data table.If you use non-approved cutting attachments (saw chain and
guide bar),that maybe cause risk of injury.