Kasei KZ-4000MT-PRO-2S страница 26 Скачать руководство пользователя

Страница: 26 / 118

Directions for use

●

Cut branches up to a maximum diameter of 4.5mm; cutting branches with a larger diameter could

damage the trimmer.

●

ONLY adjust the tilt angle with the motor switched off. SWITCH OFF themotor before removing

any branches caught up in the blades.

●

Never bring the blades close to body parts while working.

●

Always fit the blade guards when the device is switched off.

Adjustment of blade inclination (Fig. 3)

●

Turn the engine off and wait for the blade to stop.

●

Loosen the knob (1) and incline the cutting device (2) as desired.

●

Tighten the knob (1) securely. If the knob does not move enough to guarantee it is tight, extract

it and re-position it so that it can be tightened securely.

WARNING!

Do not work unless thecutting device is blocked securely.

Vertical trimming (Fig. 4)

Proceed to cut by using curved movements from the bottom towards the top, keeping the blade as
far from the body as possible.

Содержание KZ-4000MT-PRO-2S























































































































Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды

Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Результаты поиска

Содержание KZ-4000MT-PRO-2S

Отзывы:

Похожие инструкции для KZ-4000MT-PRO-2S

Бренды по названию

Популярные бренды