Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Страница: 25 / 118

18
USING THE MACHINE
ASSEMBLING THE ROD (if supplied separately)(Fig.1)
●
Insert the rod(1) in the sleeve (2) so that the hole (3) coincides with the screw(4).
●
Tighten the two screws (4) and (5) completely.The head of the screw(4) must not stick out when
tightened.
CONNECTING THE TRIMMER (Fig.2)
●
Pull out the stop pin (1) and push the rod (2) right down until the stop pin (1) clicks into the hole (3)
in the rod.This is easier to do if you rotate the bottom of the rod (2) slightly in both directions.The pin
(1) is in place when it is completely lodged in the hole.
●
Once inserted,tighten the knob (4) securely.
SETTING AT WORK
IMPORTANT! Also carefully read the operator’s manual for the brush cutter fitted with the hedge
trimming device.
Before staring work please:
●
Check that all the screws on the machine and the blade are tightly fastened;
●
Check that the blades are sharp and there are no signs of any damage;
●
Check that the protection devices are well fastened and working efficiently;
●
Check that the handgrips are well fastened