manualshive.com logo in svg

Kasei KZ-4000MT-PRO-2S, Руководство владельца/оператора

Поделиться
Скачать
Kasei KZ-4000MT-PRO-2S Скачать руководство пользователя страница 78

 67 
 

ASSEMBLING AND USING THE SHOULDER HARNESS 

1.Assemble and adjust the shoulder harness and belt,as shown. 
2.Adjust the shoulder-harness button,and move the hook to your waist, then adjust the belt(If there 
is a belt). 
3.Hang the latch tab on the harness hook. 
4.If the trimmer does't balance,then adjust the harness hanger,and the handlebar,until the grass 
trimmer balances. 
 

WARNING  

 CAUTION 

The hook is situated at your right hip,and the quick-release latch is situated at the outside. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
5.To quickly detach the grass trimmer from the harness,pull the quick-release latch tab upward; 
6.Insert the latch tongue in the slot of the quick-release latch to reattach the grass trimmer to the 
harness. 
   
 

WARNING 

 DANGER  

Before using,please check the shoulder harness and confirm it is OK.Encounter danger,please 
stop the grass trimmer immediately,and pull the quick-release latch tab,the grass trimmer will be 
depart from your body. 
 

 

 

Содержание KZ-4000MT-PRO-2S























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды