Karl Storz AIDA WD 300, Описание системы

Страница: 70 / 210

Operation
4-34
96296083EN / BA
Copying data sets
1
NOTE:
The
Copy
function is available for completed procedures.
1. Tap on Copy .
$
A window opens in which you can select the target medium.
2. Select the target medium and tap
OK
.
$
Data transfer begins.
$
During the copying process, the message
Preparing procedure data to copy to USB
appears.
$
The copying process is carried out. If the process is not carried out, it will be temporarily stored in
Open tasks .
3. Open tasks can be redirected, deleted or re-activated as required.
See also ‘4. 3. 6 Finishing’ on page 4-28.
$
When shutting down, a window indicating that copying is not completed opens.