Kärcher BR 100 R, Руководство по обслуживанию

Страница: 92 / 171

Basic settings and service procedures BR/BD 100/250 R BP / RI
Page 92 / 171 Service Manual 08.2007
5.3 Setup menu
5.3.1.2 System menu and driving module parameters
Access to the setup menu
(See chapter 5.3.1.1)
Cleaning modul parameters
and lifting modul parameters
(See chapter 5.3.1.3)
yes
no
Display
Parameter menu
drive module?
Display
Return to setup
module selection?
yes
no
Display
Display
yes
no
yes
no
Display
Return to setup
module selection?
Display
Parameter menu
system parameter?
Initialisation:
Parameter setup menu
In the setup menu the
cursor
always starts at language
Note:
If the i-button is not pressed within 30 seconds
the program automatically switches to
Battery: E.......F
Water/C: E.......F
Then restart as described in Chapter 5.3.1.1
Load operating hours
counter backup
See chapter 5.3.4
Max speed Forwards:
6.0 km/h
Max speed Reverse:
3.5 km/h
Starting ramp: 2
Braking ramp: 4
Max motor current:125A
Max braking
current:125A
Overload limit: 70 A
Gas poti type: 1
Gas poti supply 8.0V
Motor constant:
0.045 m/(Vs)
Language selection: 0
0=German 1=Engl.
Machine model
BR100/250RI
Beacon lights during
reverse travel 0
Standby time: 30 min
Discharge voltage
32.4 V =1.80 V/Z
Reset voltage
37.8V =2.1V/Z
Min brush pressure 40A
Lifting motor brush 1
0=ES 1=Block
Filter shake timePre-
sweep 15s
Filter rest time
Pre-sweep 120s
Main brush after run-
ning time from stop:3s
Brush fan after running
from stop :5s
Warning? 0=Yes 1=no 0
Chemicals metering
On=1; Off=0 0
OpHrs: 0h00m
Backup load?: 0
Note:
If the I-button is turned in an anti-clockwise direction the cursor works in the opposite direction, i.e. the menu is called
up from the last to the first parameter. The last saved cursor can be called up again after quitting the menu, e.g. by
switching back to the standard display (battery display).