Kärcher BD 100 R, Руководство по обслуживанию

Страница: 103 / 171

BR/BD 100/250 R BP / RI Basic settings and service procedures
Page 103 / 171 Service Manual 08.2007
5.4.1 Steering
Steering column
The steering column pipe (4) with internal stee-
ring rod (16) is fixed to the base frame (8) with
four retaining screws (9).
The steering movement of the steering wheel is
transferred through the toothed wheel (16) to the
toothed ring (12) and steering head (13).
Steering column with stearing bearing, footplate
removed
Wheel hub motor (M1)
1 Steering wheel
2 Locking nut, steering wheel
3 Holder for extractor tool (special tool)
4 Steering column pipe
5 Joint, steering rod
6 Brake pedal
7 Footplate
8 Base frame
9 Retaining screws, steering column (4x)
10 Castellated nut, steering head, SW 36
11 Steering bearing
12 Sprocket-wheel
13 Steering head
14 Cables, wheel hub motor (M1) and elec-
tromagnetic brake (Y1)
15 Wheel hub motor (M1)
16 Steering rod with toothed wheel
Steering column
4
5
13
7
1
2
3
16
15
12
8
11
10
4
7
6
14
Steering head and wheel nub motor
The steering head (13) is fixed to the steering
bearing (11) with a castellated nut (10).
Note:
The toothed wheel (16) and the toothed ring
(12) must have a small clearance (0.5-0.8
mm / 0.02-0.03 in). At the full steering angle
(straight ahead ± 90°) the cables (14) must
not be taut and rub against the chassis.
Regularly grease the toothed ring (12) and
toothed wheel (16) (grease type 6.288-000)
in order to minimise wear.
Note:
The steering bearing (11) is tightend with
the castellated nut (10). An incorrect tightend
castellated nut can cause noises and
damage to the bearing.
9