![background image](http://html1.mh-extra.com/html/karcher/b-300-ri-d/b-300-ri-d_original-operating-instructions_3576707066.webp)
-
25
Observe the inspection checklist!
The elapsed-time counter shows the timing of the mainte-
nance intervals.
Note:
Where maintenance is carried out by the customer,
all service and maintenance work must be undertaken by
a qualified specialist. If required, a specialised Kärcher
dealer may be contacted at any time.
Note:
For description, see section on Maintenance work.
Check fill level of fuel tank.
Check engine oil level.
Check cooler water level.
Clean / replace the air filter of the internal combustion
engine
Empty waste container.
Empty the dirt water reservoir.
Fill fresh water tank as needed.
Check brushes for wear and damage.
Check suction lip of the suction bar for wear and dam-
age.
Check/clean the water and suction system.
Check function of all operator control elements.
Check appliance for damages.
Clean the dust filter with the filter cleaning button.
Check leakiness of fuel or gas connections.
Check fluid level of battery.
(only with low-maintenance battery)
Clean the water cooler.
Clean the hydraulic oil cooler.
Check hydraulic unit.
Check the hydraulic oil level.
Check brake fluid status.
Check the pad for wear, replace if required.
Check the container lid and lubricate it.
Use the grease gun to lubricate the lubricating nipple
on the suction bar.
Use the grease gun to lubricate the lubricating nipple
on the waste container.
Use the grease gun to lubricate the lubricating nipple
on the brush head excavation.
Use the grease gun to lubricate the lubricating nipple
on the bearing of the engine.
Check the areas around the suspension, wheels, steer-
ing and combustion engine for loose screws and re-
tighten them if necessary.
Replace motor oil + motor oil filter
Check hydraulic connections for leakage and re-tighten
them if necessary.
Replace the dust filter.
Replace sealing strips.
Replace brushes.
Note:
In order to safeguard warranty claims, all service
and maintenance work during the warranty period must be
carried out by the authorised Kärcher Customer Service in
accordance with the maintenance booklet.
All service and maintenance work performed during
Customer Service maintenance must be carried out by
the authorised Kärcher Customer Service in accord-
ance with the inspection checklist (ICL).
Retighten hydraulic connections as needed.
DANGER
Risk to life
When carrying out repairs, remove the vehicle from the
danger zone of passing traffic and wear reflective cloth-
ing.
WARNING
Risk of personal injury or damage!
Risk of injury due to engine overrun. Once the engine
has been switched off, wait for 5 seconds. Stay well
clear of the working area for this time.
Be careful when using high-pressure cleaners for
cleaning!
Radiator fins, hydraulic hoses and valves, seals and
electric and electronic components must not be
cleaned with the high-pressure cleaner.
Risk of injury when vehicle accidentally starts up. Re-
move the ignition key and disconnect the battery prior
to performing cleaning and maintenance tasks on the
vehicle.
Maintenance on the hydraulic system must only be car-
ried out by trained personnel.
WARNING
Risk of personal injury or damage!
Always apply and secure the safety support with the tilt-
ing device raised.
몇
CAUTION
Risk of burns!
Allow the vehicle to cool down sufficiently before per-
forming any maintenance and repair work.
Do not touch hot parts of the hydraulics, the hydrostatic
drive motor, the combustion engine and the exhaust
system.
ATTENTION
Do not allow fluids such as motor oil, hydraulic oil, brake
fluid, diesel or coolant to enter the soil. Please protect the
environment and dispose of fluids in an environmentally
responsible way.
9.4
Maintenance intervals
9.4.1
Maintenance by the customer
9.4.1.1
Daily before starting operations
9.4.1.2
Weekly
9.4.1.3
Every 150 operating hours
9.4.1.4
Every 200 operating hours
9.4.1.5
Every 1500 operating hours
9.4.1.6
After wearing has taken place
9.4.2
Maintenance by Customer Service
9.5
Inspection and maintenance work
9.5.1
General notes on safety
66
EN
Содержание B 300 RI D
