Kamstrup ULTRAFLOW 54 DN150-250 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 64

Kamstrup ULTRAFLOW 54 DN150-250 Скачать руководство пользователя страница 62

TECHNICAL DESCRIPTION

ULTRAFLOW

®

54 DN150-250

5512-876 GB/04-2012/Rev. F1

62

13

Disposal

Kamstrup A/S holds an environmental certification according to ISO 14001, and as part of Kamstrup’s
environment policy only materials which can be recovered environmentally correctly are used to the greatest
possible extent.

Kamstrup A/S has climate accounts (Carbon footprint) for all meter types.

•

••

•

Disposal by Kamstrup A/S

Kamstrup accepts worn-out meters

for environmentally correct disposal according to previous agreement. The

disposal is free of charge to our customers, except for the cost of transportation to Kamstrup.

•

••

•

The customer sends for disposal

The meters must not be disassembled prior to dispatch. The complete meter is handed in for approved
national/local disposal. Enclose a copy of this page in order to inform the recipient of the contents.

Please note that the lithium cells are extremely inflammable if they are not handled correctly. Lithium cells and
meters including lithium cells must, therefore, be forwarded as dangerous goods. See Kamstrup document 5510-
408, ”Lithium batteries - Handling and disposal”.

Meter part

Material

Recommended disposal

Lithium cell (D-cell)

Lithium and thionyl chloride

>

UN

3091

<

D-cell: 4.9 g lithium

Approved deposit of
lithium cells

PCB

Coppered epoxy laminate,
component s soldered on

PCB scrap for concentration
of metals

Signal cable for flow sensor

Copper with silicone mantle

Cable recycling

Supply cable

Copper with PVC mantle

Cable recycling

Electronics box, base

Thermoplastic, PC 10% GF

Plastic recycling

Electronics box, cover

Thermoplastic, PC 10% GF

Plastic recycling

Mounting fitting
Distance piece for electronics box

Thermoplastic, PPS 40% GF

Plastic recycling

ULTRAFLOW

®

sensor case

Stainless steel, W.no. 1.4307

Metal recycling

Transducer holder

Stainless steel, W.no. 1.4308

Metal recycling

Transducer

Titanium

Metal recycling

Packing

Recycled cardboard and EPS

Cardboard and EPS recycling (Resy)

Please send any questions you may have regarding environmental matters to:

As from August 2005 Kamstrup's heat meters are marked according to EU
Directive 2002/96/EEC and the standard EN 50419.

The purpose of the marking is to inform our customers that the heat meter
cannot be disposed of as ordinary waste.

Kamstrup A/S

Att.: Quality and environmental

dept.

Fax: +45 89 93 10 01

[email protected]

«
...
60
61
62
63
64
»

Содержание ULTRAFLOW 54 DN150-250

































































Отзывы:

Нет отзывов