Kamstrup ULTRAFLOW 54 DN150-250, Техническое описание, Страница: 10 / 64

TECHNICAL DESCRIPTION ULTRAFLOW
®
54 DN150-250
5512-876 GB/04-2012/Rev. F1
10
4.2.1 Ordering details of separate ULTRAFLOW
®
54
Type number composition of separate ULTRAFLOW
®
54
ULTRAFLOW
®
54. Type no: 65-5 - XX XX - Y Z - XXX
Dynamic range and flow
Connection and overall length
Output module
Supply module
Final assembly and marking
In addition to the basic variants listed above in Table 3 , you must select output module (Y), supply module (Z) as
well as pulse figure programming (CC) and pulse duration (E).
The variant with galvanically coupled output module (Y=1) is solely for use together with MULTICAL
®
.
The variant with galvanically separated output module (Y=2 or 3) is used in the following situations:
1) More than 10 m cable length between MULTICAL
®
and ULTRAFLOW
®
is required.
2) As flow sensor no. 2 in connection with MULTICAL
®
. If two flow sensors are used together with
MULTICAL
®
, one must include a galvanically separated output module (Y=2 or 3). For further details see
paragraph 7.8 Calculator with two flow sensors .
3) Together with other equipment/foreign calculators.
Please note: Flow info cannot be read if output module with galvanic separation is used.
4.2.2 Type numbers of output and supply modules
Type number overview of output modules (Y) and supply modules (Z) for separate ULTRAFLOW
®
54.
Y Output module Corresponding supply module
1 Galvanically coupled module
0 (powered by MULTICAL
®
)
2 Galvanically separated module 0, 7, 8
3 Galvanically separated module 0, 2, 7, 8
Z Supply module Corresponding output module
0 No supply 1, 2, 3
2 Battery, D-cell 3
7 230 VAC supply module 2, 3
8 24 VAC supply module 2, 3
Table 5. Output modules (Y) and supply modules (Z).