KAMAZ 5490 Скачать руководство пользователя страница 272

Страница: 272 / 327

Maintenance

Regular maintenance increases the service life of the transmis-

sion. It is therefore of particular importance that maintenance

intervals are observed.

NOTES

• Please make sure that no plugs, switches, tubes, and pipes

are damaged during maintenance.

• The switching system has an essential influence on the

transmission’s functionality and service life. Avoid damages.

• Only do maintenance works when the vehicle is standing

still.

• During maintenance work, also check the transmission for

seal tightness.

• Observe the maintenance information provided by the

vehicle manufacturer.

4.1

Transmission fluid

4.1.1 Oil grade

NOTE

• When filling transmissions, only the oils specified in the

latest applicable version of the ZF List of Lubricants

TE-ML 01 or TE-ML 02 are authorized.

• The List of Lubricants can be obtained from all ZF Service

Centers or downloaded at www.zf.com.

• We recommend that you use ZF-Ecofluid M.

4.1.2 Oil fill quantity

The key requirement for the precise oil quantity is that the oil

fill is performed correctly (see Chapter 4.2.2). The oil quantity

is shown on the type plate (attached to the side of the

transmission) and in the Technical Data (refer to Chapter 1).

For oil level check, refer to Chapter 4.3.

4.1.3 Oil change interval

For oil change intervals, refer to the ZF List of Lubricants

TE-ML 01 or TE-ML 02.

Maintenance

1341 758 101 - 2012-05

Содержание 5490








































































































































































































































































































































Результаты поиска

Содержание 5490

Отзывы:

Похожие инструкции для 5490

Бренды по названию

Популярные бренды

KAMAZ 5490, Руководство по эксплуатации

Результаты поиска

Содержание 5490

Отзывы:

Похожие инструкции для 5490

Бренды по названию

Популярные бренды