KAMAZ 5490 Скачать руководство пользователя страница 238

Страница: 238 / 327

2. INTENT OF THE HEATER

•

Heating and maintaining the temperature in the

driver's cab.

•

Glasses heating to defreeze them and to remove

condensate.

Do not use the heater in the following case:

•

Heating and drying of:
- people or animals by direct hot air blowing;
- objects;

•

Hot air supply in any containers.

Attention!

Safety instructions in regards of sphere of ap-

plication and correct use!

•

The heater must only be used for the purposes

specified by the manufacturer.

3. SAFETY DIRECTIONS

Danger!

Safety hazard, burn hazard and toxic hazard!

•

The heater must only be switched on when in-

spection cover is closed and outlet pipes are installed.

•

Do not open the inspection cover while the appli-

ance is operating.

•

Before starting all diagnostic works and remedial

maintenance of the heater, turn it off, disconnect the bat-
tery from the circuit, and wait until all hot parts have got
cold.

•

Do not operate the heater in closed spaces, for ex-

ample in garages or in closed parking area.

•

Adjustable blower nozzles should always be di-

rected in such a way as to avoid direct hot air blow-off of
people and animals, as well as thermally sensitive objects
(fixed and loose).

Содержание 5490








































































































































































































































































































































Результаты поиска

Содержание 5490

Отзывы:

Похожие инструкции для 5490

Бренды по названию

Популярные бренды

KAMAZ 5490, Руководство по эксплуатации

Результаты поиска

Содержание 5490

Отзывы:

Похожие инструкции для 5490

Бренды по названию

Популярные бренды