Kaleidescape Part No. 101-0105-00 Rev 5
Page 87
Kaleidescape Premiere Line Installation Guide
System Configuration
2.
Number of audio channels
Configure the
Number of audio channels
based on the audio
capabilities of the receiver. (Option is available only if
Player decode
is
selected.)
If the audio level for movies is lower for M-Class players than the audio
level for music and there are only two speakers, set the number of audio
channels to two.
3.
Audio receiver connected to optical/coax supports
If using a coaxial or optical connection, select the audio formats that the
receiver supports. If the receiver connected to coaxial or optical does not
support DTS Digital Surround or Dolby Digital, these soundtracks can be
decoded by the player and stereo PCM output instead. (Option is
available only if
Player decode
is selected.)
The
Audio receiver connected to optical/coax supports
option is used
when a receiver, processor or display using the coaxial or optical S/PDIF
connection has limited audio format decoding capabilities. Most modern
receivers and processors offer comprehensive audio format decoding,
and so the default option can be used. But for more limited devices,
audio can be sent as PCM stereo only, or as any format except DTS
Digital Surround.
4.
Music volume
Choose how to output the
Music volume
.
With the default setting
Play music at the recorded volume
, music
volume may be louder than movie volume. To play music at the same
volume as movies, select
Reduce the music volume to be similar to
movie volume
. To play all albums at the same volume, select
Reduce
the music volume and play songs from different albums at similar
volumes
.
