Kaleidescape premiere series, Руководство по установке

Страница: 66 / 175

Kaleidescape Part No. 101-0105-00 Rev 5 Page 66
Kaleidescape Premiere Line Installation Guide System Configuration
• Server IP address
http://www.xxx.yyy.zzz (Windows or Mac) where www.xxx.yyy.zzz is
the IP address of the server.
• Serial number URL
When setting up separate Premiere systems, each with a dedicated
server on the same subnet, and System URLs have not been
changed and the server IP addresses are not known, use an address
beginning with
ks- followed by all twelve digits of the server serial
number.
For example, to access the browser interface of a server with the
serial number 0103 0001 2345, enter
http://ks-010300012345 (Windows) or
http://ks-010300012345.local (Mac)
Troubleshooting if the Browser Interface Does Not Load
If the web browser cannot load the browser interface using one of the
methods above. Refer to
Network Requirements on page 165 .
Viewing System Information
After the Premiere line server is installed, powered on, and has an active
network link, use the following procedure to view system information.
1. Open the browser interface as described in Accessing the Browser
Interface on page 65 .
2. If a login page appears, enter the password and select Login . If the
password needs to be reset, connect the system to the Internet and
contact Kaleidescape Technical Support
3. The
HOME
page appears. See Figure 4-1 .
When more than one Premiere system exists on the network, select the
SETTINGS
> Components page and verify that the connection is to the
correct system by checking the server serial number(s) listed. For help
accessing the
Components page see Configuring System Components
on page 76 .
To connect to a different system, select View another system from the
message at the top of the page and select the system. A new window
opens with a connection to the
HOME
page of the browser interface for
the other system. See Figure 4-1 .