Kaleidescape Part No. 101-0105-00 Rev 5
Page 50
Kaleidescape Premiere Line Installation Guide
Physical Installation
4. Align the six plastic tabs on the panel with the six slots on the left side of
the player.
5. Press the side panel tabs into the slots.
6. Slide panel forward until the panel locks into place and is flush with the
back of the player.
7. Repeat for right side panel, number 502-1003.
Note:
Panels are purely cosmetic. If space is a consideration, panels can be
left off.
Wall Mounting the M300 Player
The M300 Player ships with a bracket for mounting the player to a vertical
surface and a bracket for mounting the power supply.
The M300 Player can be mounted two ways.
• Permanently to a wall with bracket screwed to the player
• Without a screw in the bracket so the player can be easily removed
Note:
Mounting the M300 Player vertically can interfere with receiving IR
commands by the IR receiver on the front of the player (just below the front
panel). The
IR-IN
port on the back of the player can be used to connect the
