Kaleidescape Part No. 101-0105-00 Rev 5
Page 51
Kaleidescape Premiere Line Installation Guide
Physical Installation
player to a remote IR receiver, an RF gateway, or a control system. See
Connecting Components to the Network on page 40
.
Site Preparation
Use the following procedure to prepare the mounting site.
1. Plan the location. Consider orientation, cable lengths, and ventilation as
well as local building and electrical codes.
The M300 Player can be mounted with connectors up or down, or to
either side (front panel down provides best cooling). The shape of the
bracket fits the shape of the player.
2. Find a mounting spot that allows for cable length limitations. Make
allowances for strain relief.
3. Determine if the power supply must be mounted with the player to keep
the player within the DC cable length limitation [4 feet (1.2 meters)].
Do NOT lengthen the DC cable of the power supply.
Note:
Mounting the mini player vertically can interfere with remote control IR
reception because the IR receiver is located on the front of the player
just below the front panel. The IR-IN port on the back of the player can
be used to connect the player to a remote IR receiver, an RF gateway,
or a control system.
