KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию

Страница: 92 / 288

8.2.6 Shutting down in an emergency
Stop the machine in case of danger by pressing the «Quick stop» button.
Use the «Quick stop» button to stop the machine only in emergencies.
Quick shutdown
➤ Press the «Quick-stop» button.
■ The engine stops immediately.
■ The «Quick stop» button remains latched in after being pressed.
■ The re-start inhibitor is activated (20 seconds).
■ The «Information» key and «Stop» key are illuminated.
■ The «Acknowledge» key flashes.
Put the machine back into operation
When the fault has been cleared, the machine must be reset.
Precondition The fault has been rectified.
➤ Unlatch the «Quick-stop» button.
➤ Confirm the message with the «Acknowledge» key.
The «Information» key, «Stopp» key and «Acknowledge» key are illuminated.
The machine can now be started again.
8.3 Setting parameters
Parameter setting and changing takes place in the controller settings menu.
■ Select
<Main menu => setting>.
■ See chapter 4.8.2 for using the settings menu.
■ Some menu options are password protected.
1. Use the «UP» and/or «DOWN» keys to navigate to the menu option containing the param‐
eter to be set.
2. Use the «RIGHT» and/or «LEFT» key to set the required parameter value.
3. Confirm and save the setting with «Enter» .
Every action can be cancelled with the «escape» key .
8.4 Acknowledging alarm, warning and maintenance messages
Information from the controller is interpreted as displayed messages.
The message is stored in the event memory at the same time.
See chapter 4.8.3 for further information on the event memory.
8 Operation
8.3 Setting parameters
80
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
No.: 9_6975 00 E