manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 32 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 32

➤ Wear close-fitting clothes and a hair net if necessary.
➤ Fit all safety devices and panels before starting the engine.

Electricity

➤ Allow only qualified and authorized electricians or trained personnel under the supervision of a

qualified and authorized electrician to carry out work on electrical equipment according to elec‐

trical engineering regulations.

➤ Check regularly that all electrical connections are tight and in order.
➤ Only qualified and authorised electricians may carry out work on the generator or generator con‐

trol box.

➤ Never carry out work on the generator or generator control box unless the machine is shut down.

Temperature

➤ Avoid contact with hot components. These include, for example, engine, compressor airend, oil

and compressed air lines, coolers and oil separator tank.

➤ Wear protective clothing.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or

heat from igniting fuel or oil vapours or parts of the machine.

Noise

➤ Operate the machine only with intact soundproofing.
➤ Wear hearing protection if necessary. The pressure relief valve blowing off, for example, can be

particularly loud.

Operating fluids/materials

➤ Strictly forbid fire, open flame and smoking.
➤ Follow safety regulations when dealing with fuel, lubricants and chemical substances.
➤ Avoid contact with skin and eyes.
➤ Do not inhale fumes or aerosols from fuel or oil.
➤ Do not eat or drink while handling fuel, cooling and lubricating fluids.
➤ Keep suitable fire extinguishing agents ready for use.
➤ Use only KAESER approved operating materials.

Unsuitable spare parts

➤ Use only spare parts approved by the manufacturer for use in this machine. Unsuitable spare

parts compromise the safety of the machine.

➤ Use only genuine KAESER pressure components.

Conversion or modification of the machine

➤ Do not permit conversion or modification of the machine as this can compromise function and

safe working.

3.5.2  Safe machine operation

Information on conduct that will help in handling the machine safely is given here.

3

Safety and Responsibility

3.5

Dangers

20

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

No.: 9_6975 00 E

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов