manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 78 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 78

Password is not activated - incorrect password.
➤ Re-enter the password.

The cursor can be moved «LEFT»   or «RECHTS»   to overwrite and incorrect entries.

Fig. 33 Password level 1 activated.

1. Correct the password.
2. Confirm the correct password with «Enter»  .

The activated password is displayed.

The password level is reset 3 minutes after the last key has been depressed. Temporary settings

are not saved and are lost!
Passwords for other levels are entered in the same way.

7.6  Engine settings

This menu option is not available to users. Changes in this menu option can only be made with the

correct password.

The following parameters can be changed:
■ Starter running time (renter, password level 1).
■ Engine cool-down period in unloaded run-on (renter, password level 1).

The following parameters can only be set by Service Technicians.
■ EngineLOAD speed (password level 3).
■ EngineIDLE speed (password level 3).

LOAD and IDLE speeds can be temporarily changed for service purposes or necessary tests.

These changes are not saved and are lost when the controller is switched off.

Precondition Controller switched on

<main menu => settings => engine settings> selected.

7

Initial Start-up

7.6

Engine settings

66

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

No.: 9_6975 00 E

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов