KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию

Страница: 168 / 288

CAUTION
There is danger of accidents caused by snow or ice falling off the machine.
Snow or ice falling from the towed machine can endanger following vehicles.
Problems with driving dynamics and damage to the machine could occur.
The maximum permissible axle load could be exceeded.
➤ Do not tow the machine if it is coated in snow or ice.
➤ Remove any snow or ice before towing.
Observe / carry out the following before towing:
1. Make sure the towing hitch is compatible with the ball or eye coupling on the towed machine.
2. Check that the machine is shut down and secured against accidental restarting.
3. Detach all connecting lines and hoses.
4. Make sure there are no unsecured tools lying on or in the machine.
5. Close and lock the access doors.
Adjust the towbar to suit the height of the towing vehicle hitch.
When the machine is coupled up, the towbar must be parallel with the ground.
Fig. 82 Towing alignment
WARNING
Danger from problematic driving dynamics!
The permissible loading range may be exceeded or undercut.
Personal injury may result from towing.
Damage to the machine and/or towing vehicle is possible.
➤ Do not couple up the machine at an angle to the towing vehicle.
➤ Ensure that the towbar is horizontal when coupled to the towing vehicle.
➤ Adjust the towbar height to suit the height of the hitch on the towing vehicle.
Further information See chapter 6.4.1 for towbar height adjustment.
Coupling-up
To couple up the machine, lower the open coupling onto the ball of the towing vehicle so that it clicks
into place. The coupling is fully locked when the green locking indicator protrudes and is visible from
the side.
12 Decommissioning, Storage and Transport
12.2 Transporting
156
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
No.: 9_6975 00 E
Option sa
Option sa, sd