KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 175 / 288

Fig. 89 Transporting using a forklift truck
1
Skids
2
Lifting lugs
1. Close and lock the access doors or canopy.
2. Position the fork truck to the side of the machine with the forks lined up with the lifting lugs.
3. Drive the forks fully through the lifting lugs as far as possible.
The forks are fully under the machine.
4. Lift the machine carefully.
12.2.5 Transporting as a load
The means of transporting will determine the type of packing and load securing.
Packing and securing methods must be such that, assuming proper handling, the goods arrive in
perfect condition at the destination.
Consult KAESER Service for advice concerning sea or air transport.
Material Chocks
Restraints or timber balks
Straps
Load securing devices
National directives and regulations for securing loads should be followed.
Load securing is taken to mean that by full braking or sudden turning the load will not slide, fall,
roll or cause unnecessary noise. Accepted technical regulations should be observed (e.g. VDI
directive 2700 ff in Germany).
Responsibility for properly secured loads falls on the driver, the vehicle keeper and the carrier.
Use chocks, restrainers or timber balks for securing the load.
If necessary, use straps across the chassis and the towbar.
12 Decommissioning, Storage and Transport
12.2 Transporting
No.: 9_6975 00 E
Service Manual Screw Compressor
M135 SIGMA CONTROL MOBIL
163
Option sc