manualshive.com logo in svg

KAESER M135 SIGMA CONTROL MOBIL, Руководство по обслуживанию, Страница: 177 / 288

Поделиться
Скачать
KAESER M135 SIGMA CONTROL MOBIL Скачать руководство пользователя страница 177

Frozen moisture can damage components, valve diaphragms and gaskets.

Advice can be obtained from KAESER on storage and commissioning.

CAUTION

Moisture and frost can damage the machine.
➤ Prevent ingress of moisture and formation of condensation.
➤ Maintain a storage temperature of >0 °C.

➤ Store the machine in a dry place, free from frost if possible.

12.4  Disposal

When disposing of a machine, drain out all liquids and remove old filters.

Precondition The machine is decommissioned.

1. Completely drain the fuel from the machine.
2. Completely drain the cooling oil and engine oil from the machine.
3. Remove used filters and the oil separator cartridge.
4. Drain the coolant from water-cooled engines and systems.
5. Hand the machine over to an authorized disposal expert.

➤ Parts contaminated with cooling oil or engine oil must be disposed of in accordance with

local environment protection regulations.

12 Decommissioning, Storage and Transport

12.4 Disposal

No.: 9_6975 00 E

Service Manual    Screw Compressor  
M135  SIGMA CONTROL MOBIL

165

Содержание M135 SIGMA CONTROL MOBIL

































































































































































































































































































Отзывы:

Нет отзывов